CCI - 65  Floor Revitilizer

IMPROVES GLOSS ON DULL FLOORS AND REMOVES BLACK HEEL MARKS

The use of CCI-65 in routine daily maintenance will keep flooring looking its best, from initial application until time for recoating.

CCI-65 provides greater floor maintenance flexibility than ever before.

CCI-65 special formulation of cleaners and polymers, made possible through advancing floor maintenance technology, is equally well-suited to use in high speed polishing machines or with traditional spray-buffing and mop-buffing technologies.

For all buffing techniques, mop the floor with 4 to 8 ounces of CCI-65 per gallon of water and allow to dry. Low-abrasion buffing pads should be used for maximum results.

Add 4 to 8 ounces of CCI-65 per gallon of water into the supply tank of automatic floor machines. Dispense diluted CCI-65 from the machine according to manufacturer's instructions.

For 3150 rpm or slower machine, the use of a 1:3 dilution in sprayer allows the operator to improve gloss on dull floors and remove marks and scuffs by "heeling" the machine.

CCI-65 may be used in traditional spray-buffing applications to notably enhance gloss. It is strongly suggested that the floor be pre-mopped with product at 1:15-20 dilution to reduce the rate of soil accumulation on the pad. No rinsing is needed after mopping.

AVAILABILITY

CCI-65 is available in I gallon, 5 gallon and 55 gallon drums.

TECHNICAL SERVICE

Technical information and assistance may be obtained from Chem-Coat Industries Inc.