Cemdyes
provide a distinct color system

• Description

• Benefits

• Technical Data

• Availability

• Surface Preparation

• Application

 DESCRIPTION

Cemdyes colors are elegant and unique. Cemdyes are specially designed to provide colors for cementations surfaces. Cemdyes scientifically formulated powders are easy and ready to use just add them to Alcohol or Acetone and the colors will come alive.  Cemdyes can also be used with integral colors, dry shake hardeners and reactive concrete stains. Cemdyes are also used with Chem-Coat’s Lith-O-Bond which is designed for polished concrete system.  

BENEFITS... back to top

• Vibrant Colors

• Easy to Use

• Quick Drying

• Great Accent for Reactive Stains

• UV Resistant

• Colors can be mixed  

• Ideal for Polished Concrete

• Perfect for Logos

  TECHNICAL DATA... back to top

AVAILABILITY... back to top

Cemdyes are available in two standard units: Quart & One Gallon Mix Unit

SURFACE PREPARATION... back to top

Surface must be clean, dry and free of all foreign contaminates (oil, grease, dirt, dust, cleaners, etc).  After cleaning the surface be sure all residue is removed with clean water. Be sure not only to remove all chemical residue but also dust, vacuum or sweep. Read all product labels and instructions. Always do a test area with all products in an inconspicuous area before project starts to assure desired results and compatibility of all products, and approval.

APPLICATION... back to top

Pour dye contents of bottle into1 gallon of acetone or alcohol.  Shake well to disperse the dyeing   agents.  Concrete sub-straight must be clean and dry before applying dye.  Apply dye with a cone tip pump sprayer that is compatible with acetone and/or alcohol.  Spray uniform coat and avoid letting the product pool in low spots.  Dye will dry to touch in approximately 1 - 5 minutes.  For removal of dyes agent residue use an auto scrubber with white pad and water and/or a mop and water. Technical Data sheet will have expanded product directions regarding using the dyes with polished concrete, sealing and coating the concrete surfaces.

RESADUE REMOVAL: Allow initial rinse water to dwell for a few minutes in order to loosen residues, if vacuuming surface do only after initial residue removal.  It is normal to have slight coloring/tinting in the rinse water. If dye residues are not rinsed properly coating, sealers and/or densifiers will not adhere correctly and will lift off giving the appearance of dye release off the surfaces during and after the job is complete.  The coverage rate is approximately 400-600 sq. ft. per gallon depending on the surface and color desired more then one coat maybe needed.

WARNING ? Use only as directed.  Once dye is mixed with acetone or alcohol, contents will be highly flammable and may cause flash fires.  During use and until vapors are gone: keep properly ventilated and keep away from heat, sparks or open flames (pilot light).  A non-explosive ventilation system may be required to achieve proper ventilation.  Harmful if inhaled.  Keep out of reach of children.  In case of emergency call 911 and/or 1-800-535-5053

MDSD: Obtain all Material Safety Data Sheet for all products including the mfg. of the acetone and other products used on the job site

IMPORTANT

Do a small test in an inconspicuous area before project starts to assure compatibility of all products, and approval.  Read all instructions, warnings and limited liability on all product labels and technical sheets before using Chem-Coat Products.  For any questions, call:  1-800-511-2769. For Professional Use Only.

HEALTH AND SAFETY

 1) Use of respirators is mandatory when using this product in confined areas.

2) Use only with adequate ventilation.

3) If swallowed, do not induce vomiting. Seek medical attention immediately.

4) Use of gloves, goggles and other protective clothing is advised when using this product.

5) Follow all State and Federal regulations when using this or any other product.

6) Follow all safety instruction from the manufacturer of the Acetone and/or Alcohol used with Cemdyes.