|
Floor
Revitilizer
|
IMPROVES GLOSS ON DULL FLOORS AND
REMOVES BLACK HEEL MARKS
The use of CCI-65 in routine daily
maintenance will keep flooring looking its best, from initial
application until time for recoating.
CCI-65 provides greater floor
maintenance flexibility than ever before.
|
 |
CCI-65 special formulation of
cleaners and polymers, made possible through advancing floor maintenance
technology, is equally well-suited to use in high speed polishing
machines or with traditional spray-buffing and mop-buffing technologies.
For all buffing techniques, mop the
floor with 4 to 8 ounces of CCI-65 per gallon of water and allow to dry.
Low-abrasion buffing pads should be used for maximum results.
Add 4 to 8 ounces of CCI-65 per
gallon of water into the supply tank of automatic floor machines.
Dispense diluted CCI-65 from the machine according to manufacturer's
instructions.
For 3150 rpm or slower machine, the
use of a 1:3 dilution in sprayer allows the operator to improve gloss on
dull floors and remove marks and scuffs by "heeling" the machine.
CCI-65 may be used in traditional
spray-buffing applications to notably enhance gloss. It is strongly
suggested that the floor be pre-mopped with product at 1:15-20 dilution
to reduce the rate of soil accumulation on the pad. No rinsing is needed
after mopping.
AVAILABILITY
CCI-65 is available in I gallon, 5
gallon and 55 gallon drums.
TECHNICAL SERVICE
Technical information and assistance
may be obtained from Chem-Coat Industries Inc.
|
